What determines the number of transmitters on a road
The number of transmitters is set by the spacing. On plant roads a spacing of about 100 m is assumed, because for vehicle traffic that density is enough to fix a position from the signals of several transmitters. Dividing 1,000 m by 100 m gives 10 units per kilometre. This is the figure from the spacing alone, without a margin for bends, junctions and sections screened by structures.
In practice the technical director should add to this number a margin for places where coverage should be denser: the area around the weighbridge, the gate, the loading stands and the switches. How many exactly follows from walking the road, not from a table.
What the monthly cost is made of
Transmitters can be taken on a subscription option. Indicatively this is about 7 PLN net per unit per month: 100 units cost about 700 PLN net per month. These are indicative ranges from 2025-2026 deployments; the quote is individual, so the final rate depends on the size of the installation and the terms of the contract.
The subscription does not cover costs the plant bears regardless of the supplier: labour for mounting on poles and structures, and any permits for work in Ex zones. The installation itself is simple, because the transmitters are fixed with cable ties or adhesive, without cables and without mains power.
- spacing about 100 m: about 10 transmitters per kilometre
- subscription indicatively about 7 PLN net per unit per month
- one kilometre of road: about 70 PLN net per month
- mounting with ties or adhesive, no power supply needed
Indicative monthly subscription by length of roads
The calculation for roads of different lengths
The table below multiplies the length in kilometres by 10 transmitters and by 7 PLN. For 5 km of road this is 50 transmitters and about 350 PLN net per month; for 10 km, 100 transmitters and about 700 PLN net per month; for 20 km, 200 transmitters and about 1,400 PLN net per month. Per year, 10 km comes to about 8,400 PLN net.
This is an example calculation, based only on the spacing and the indicative subscription. It does not include transmitters in buildings, where density is higher, because interiors are populated at roughly one transmitter per 100-200 m2.
What raises and what lowers the bill
The cost rises when the plant wants more detail, for example a 50 m spacing on selected sections: then 20 transmitters per kilometre are needed. It also rises on roads with many junctions and structures that screen the signal.
The cost falls when some roads matter less for safety and a sparser spacing is enough. A pilot on one section shows at what density the map is readable for security and the dispatcher, before the plant orders the whole network.
Number of transmitters by length of roads
How to compare this cost with alternatives
Comparison with a GPS-based solution is misleading, because under pipe racks and near buildings GPS loses accuracy, and in halls it does not work. A fairer comparison concerns the total cost: whether the plant must run cables and power, or can mount transmitters without any infrastructure.
With battery transmitters, the cost of energy and servicing is included in the subscription, so the technical director does not add a separate power line to the budget. For the plant's own calculation it is worth adding the cost of mounting labour and servicing in Ex zones.
Transmitter subscription on plant roads: calculation for 10 km
| Parameter | Value |
|---|---|
| Transmitter spacing | 100 m |
| Transmitters per kilometre | 10 pcs |
| Subscription per unit | 7 PLN net per month |
| Length of roads | 10 km |
Result: 100 transmitters and about 700 PLN net per month, about 8,400 PLN net per year, or about 70 PLN net per month per kilometre.
Note: Example calculation on the assumptions in the table; indicative rates from 2025-2026 deployments; individual quote. Does not include transmitters inside buildings or installation labour.
Video
Frequently asked questions
How many transmitters are needed per kilometre of plant road?
At a spacing of about 100 m, about 10 units. This figure comes from the spacing alone; the final layout is set by walking the road.
What is the monthly subscription per kilometre?
Indicatively about 70 PLN net at about 7 PLN net per transmitter. These are indicative ranges from 2025-2026 deployments; the quote is individual.
Do cables and power supply have to be run?
No. The transmitters are mounted on poles and structures with cable ties or adhesive.
Does the calculation include transmitters in buildings?
No. Inside buildings about one transmitter per 100-200 m2 is assumed, so for halls this is calculated separately.
Calculate the kilometres of your own roads
Give InnerWeb the length of your roads and the floor area of your halls, and we will prepare an indicative count of transmitters and subscription.
Let's talk