How the panel recognises a scanner and how it differs from a person typing
A code scanner works like a keyboard: it types the characters of the code into the active window and sends Enter at the end. The security panel tells such a stream apart from manual typing by the gap between characters, which for a scanner is below 34 ms. A person types more slowly, so their input is not treated as a scan.
An incomplete read, for example after an interrupted scan or a covered code, is cleared after 233 ms. This stops leftover characters from joining the next scan and creating a wrong address.
The practical conclusion for IT: no driver or plug-in is needed for a scanner in keyboard mode. The panel window only has to be active, and the scanner has to append an Enter suffix.
HID or USB-COM: which mode to choose
HID (USB keyboard) mode is the simplest: the scanner is plugged into the desk computer and types the characters immediately. The downside is dependence on the keyboard layout and on window focus, because the code goes wherever the cursor is.
USB-COM mode (serial port) bypasses the keyboard layout, because characters arrive as data, not as key presses. The panel uses it through Web Serial, which works in the Chrome and Edge browsers. The scanner purchase should therefore be checked against the browser set up at the security desk.
Changing the interface, for example from HID to USB-COM, restores default symbol settings on many scanners. After every such change, check the reading of web addresses and the keyboard country code before the desk goes back to work.
- HID: no driver, but sensitive to the keyboard layout and window focus
- USB-COM: independent of the keyboard layout, needs Chrome or Edge and port access permission
- After changing the mode: address read test, country code test, Caps Lock test
Time windows in scanner handling
Keyboard layout and Caps Lock: why a scan can be garbled
A scanner set to a different keyboard layout, for example French AZERTY, types other characters than the system expects. Caps Lock has a similar effect. A badge address consists of letters, digits and special characters, so one shifted key breaks the whole code.
In such a case the panel's parser tries a second time with the mapping reversed, so a scan with the wrong layout may still be recognised. This is a safeguard against configuration errors, not a reason to leave the scanner in the wrong layout. The keyboard country code is set once, during installation.
If after replacing the gate scanner all badges suddenly stop working, the first suspect is the keyboard layout or disabled address reading, and only later the network.
Why the scanner sends nothing although the light blinks
On scanners from some manufacturers, reading of QR codes containing a web address is disabled by default. The device signals a read with a sound and a light, but passes nothing to the computer. This symbol type must be enabled explicitly in the configuration.
Programming with configuration codes requires the USB cable to stay connected for the entire sequence. Loss of power during programming discards the settings being changed and the scanner returns to its previous state, which creates the impression that some codes worked and others did not. After finishing, scan a test code instead of assuming the configuration passed.
Two ports of the same scanner and double scans
In USB-COM mode the scanner may appear in the system as two ports of the same device. The panel opens all ports of the device and removes duplicates within a 2584 ms window, so one scan is not counted twice.
A separate mechanism works on the server side: a repeated scan of the same code within 5 seconds is ignored, with no new entry and an informational message about a duplicate scan. This protects against a situation where an impatient guard or visitor scans a badge twice and the system records both an entry and an immediate exit.
Security: what the panel does with a read code
The code from the badge is treated only as a string to be recognised by pattern. It is not opened as an address, not interpreted as HTML and not executed as a command, and its length is limited. Scanning a substituted badge with suspicious content therefore triggers nothing at the desk.
For an IT audit this is a useful argument: the scanner is a source of input data, but it has no authority to trigger actions beyond recognising the code and recording the verdict.
Checklist
Video
Frequently asked questions
Does the scanner need a driver?
Not in USB keyboard mode. The scanner types characters into the active window, and the panel recognises a scan by character gaps below 34 ms. USB-COM mode needs a browser that supports Web Serial, that is Chrome or Edge.
Why did the scanner stop reading addresses after a mode change?
Changing the interface, for example from HID to USB-COM, restores default symbol settings on many scanners. Re-enable address reading and check the keyboard country code.
What to do when the scanner appears as two ports?
Nothing beyond setting USB-COM mode. The panel opens all device ports and removes duplicates within 2584 ms, so a scan is not counted twice.
Can a scanned code trigger anything at the security desk?
No. The code is treated only as a string to recognise by pattern, never as an address to open, HTML or a command, and its length is limited.
Prepare the scanner station with our team
We will show the scanner and security panel configuration on your hardware and browser before you buy further devices.
Let's talk