InnerWeb
Skip to main content

Why the gate denied entry: a guard's FAQ

A badge scan ends in a denial, and a supplier or a visitor with a booked appointment is waiting behind the gate. The guard needs one thing: the reason, which the system gives in a fixed order. Below we answer the questions security staff ask after a denial, with short answers based on how the system works.

6
denial codes in a fixed order
Source: InnerWeb feature documentation
4
elements of the gate verdict
Source: InnerWeb feature documentation
13 s
refresh interval of the evacuation list
Source: InnerWeb feature documentation

How the system reaches a denial

The gate does not judge a person, only the set of conditions assigned to their account. After a QR badge or RFID card scan, the system checks four elements: valid trainings, qualifications for hazardous work, an active work permit and an active account. Only a full set gives entry, and that entry is recorded in the log.

Important for security: the system does not open the gate or the barrier itself. The verdict is information for the guard and an entry in the log, while the physical opening stays with the plant's existing access control system. In this way InnerWeb complements access control rather than replacing it.

Questions about the order of denial reasons

Denial codes follow a fixed order, and the guard sees the first reason that stopped the person. This means that after one cause is removed, another may appear, and it is worth knowing this before promising a visitor quick entry.

In what order does the system give the reason?

The order runs from the first check to the last:

  • account inactive,
  • no health declaration,
  • no trainings,
  • no qualifications,
  • permit expired,
  • no permit or appointment.

Why do I see only one reason and not all of them?

Because the check stops at the first unmet condition. If the account is inactive, the system does not check trainings any more. The guard should therefore report the problem to the right person and, once it is removed, scan the badge again, rather than assuming that this one reason was the only one.

What does a denial for no permit or appointment mean?

The person has neither a work permit in progress nor a planned visit for that day. A planned visit replaces the permit requirement for one day, but it does not waive trainings, qualifications or an active account. A visitor with a pre-announced visit can therefore still be stopped by an earlier condition.

Position of each check in the denial order

Position of each check in the denial orderHorizontal bar chart: six checks in order from inactive account to no permit or appointment0246positionAccount inactiveAccount inactive: 1 position1No health declarationNo health declaration: 2 position2No trainingsNo trainings: 3 position3No qualificationsNo qualifications: 4 position4Permit expiredPermit expired: 5 position5No permit or appointmentNo permit or appointment: 6 position6
Source: InnerWeb feature documentation: order of denial codes

Questions about the third verdict: a request for a declaration

Next to "admitted" and "denied", the gate knows a third verdict. When a guest has a badge but has not submitted today's health declaration, the system asks for the declaration. It then records neither an entry nor a denial event in the safety log.

Is a request for a declaration a denial?

No. It is an intermediate step: the person does not enter, but no denial entry is created in the log, because nothing wrong has happened. One document is missing, and it can be submitted on site, for example at the registration desk by the gate or at the kiosk.

Will the guest enter straight away after submitting the declaration?

Yes, provided the other conditions are met. The declaration is recorded once per person per day, so after it is submitted, further scans on the same day do not require it again. The procedure starts afresh the next day.

Questions about what goes into the log

The guard also asks whether a denial leaves a trace and whether it can be reversed. A scan that ends in entry records the entry in the log, and a denial with a reason code is an event that someone can review later. A request for a declaration creates none of these records.

The practical consequence: do not scan the badge repeatedly in the hope that the result will change. Each scan with a denial code is one more event in the log, which makes later analysis harder. It is better to stop after the first message, remove the cause and only then repeat the scan.

Questions about exit and evacuation

The health declaration applies to entry only. A person who is already on site can always leave, so they do not stay on the evacuation list for the nightly automatic sign-out. A denial at exit for a missing declaration is therefore ruled out.

The evacuation list is built from QR scans at the gate and refreshes every 13 seconds. It divides people into six groups: guests, couriers, suppliers, plant employees, external companies and uncertain. It does not know where a person is inside the building, so at the assembly point the count is based on gate scans, not on location.

What to do at a denial: the guard's short path

A good gate procedure fits on one card. The guard reads the reason code, informs the person, reports the case to the right role and waits for the cause to be removed. The guard does not grant permissions alone and does not bypass the system, because every workaround undermines the reliability of the entry register.

  • read the first reason given, and do not guess the next ones,
  • for a missing declaration, direct the guest to the place where it can be submitted,
  • for missing trainings or qualifications, call the host or the OHS department,
  • for a missing appointment, check whether the host has pre-announced the visit,
  • after the cause is removed, scan the badge once more.

Checklist

Video

Frequently asked questions

Can a guard admit a person despite a denial?

The system does not open the gate, so a guard can physically do it, but the entry will not be recorded according to the procedure. A manual admission bypasses the register and weakens the evacuation list, so it should require a decision by an authorised role and an entry in the log.

Why does a badge work for one guest and not for another?

The verdict depends on the person's account: trainings, qualifications, permit or appointment, and the declaration for that day. Two people from the same company can therefore get different results.

Does the denial also apply to plant employees?

The health declaration requirement applies to people from external companies and to guests. Internal employees are exempt from it, but the other conditions of the verdict, such as trainings and an active account, still apply to them.

Where do I find the reason if the gate screen was unreadable?

Denial events are recorded in the safety log, so the reason code can be reconstructed afterwards. A request for a declaration creates no such record, so a repeat scan helps in that case.

We will show the gate verdict on your scenario

Book a talk with InnerWeb and we will go through the denial codes for your gate and how the system works with your existing access control.

Let's talk