Who these recommendations are for
We address these recommendations to the OHS manager, the process safety specialist and the plant director who signs off the risk assessment. They work in plants where employees carry out rounds, on-call duties and servicing out of reach of colleagues: in chemicals, power generation, steel, water utilities and logistics. The basis is Article 226 of the Polish Labour Code, which requires occupational risk assessment and informing employees about risk, together with the regulation on general occupational health and safety rules.
The recommendations do not replace the risk assessment of a specific workplace. They set out the order of questions that lets you complete the assessment quickly and defend it in an audit or after an incident.
Recommendation 1: start with exclusion criteria
Before choosing any technology, decide which tasks must never be performed alone. These are tasks where the outcome may be irreversible before help arrives after a no-movement alarm: entry into confined spaces, work at height without the possibility of self-rescue, live work, zones with toxic or explosive atmospheres, and work for which a regulation requires a team.
Write the exclusion criteria into the instruction and into the work permit template, so that the shift supervisor does not have to make ad hoc decisions. Technology, however good, is never an argument for removing the safeguard of a second person.
Sample time budget from no movement to help
- With location
- Without location
Recommendation 2: assess the workplace, not only the employee
Risk depends on place, time and task. The same operator is safer on a daytime round near an access road than at night in a remote part of the installation. The risk catalogue should therefore be linked to a location and to a type of work. In InnerWeb, risks can be assigned to a location at any level of the plant hierarchy and to a type of hazardous work, and the employee sees the risks and protective measures before starting the job.
Add four items to the workplace card: time spent out of contact, places without communication coverage, distance to the nearest person and the time it takes help to arrive. These four numbers determine the protection level.
Recommendation 3: match the protection level to the risk
A practical split has three levels. Level one is periodic contact: the employee confirms presence at set intervals. Level two adds an SOS button and no-movement detection. Level three adds location on a map with the last known position, which shortens the search time. A higher level does not replace a lower one: SOS requires a conscious employee, while no-movement detection works even when the employee can no longer call for help.
- Level 1: periodic contact and presence confirmation.
- Level 2: SOS on a watch and device no-movement detection with independent time measurement on the server.
- Level 3: level 2 plus location from BLE beacons without GPS and an alarm on the map.
Recommendation 4: set response-time thresholds and calculate the time budget
The no-movement threshold is a compromise between detection speed and the number of false alarms. In the admin panel you configure the response time, the time for the employee to confirm and the sensor sensitivity thresholds, so the value is matched to the workplace and documented in the risk assessment. The sample calculation below shows the method, not product parameters.
Assumptions: no-movement threshold 5 min, time for the employee to confirm 1 min, dispatcher notification and decision 2 min, help reaching a known location 8 min, and without location 20 min. The total with location is 16 min and without location 28 min, so the 12 min difference comes solely from knowing where the employee is.
Recommendation 5: design the escalation chain
An alarm without a recipient is worthless. After the threshold is exceeded, the system notifies the responsible people by push and e-mail, creates an alarm permit from the ALARM template, marks the place on the map and can trigger an external webhook, for example a call to the person on duty. Define who is the first recipient, who is the deputy and after how long, and when the case goes to the shift supervisor. The system notifies the people named in the configuration and does not call the emergency services: the decision to call them is taken by a human.
Recommendation 6: check coverage and power
The most common cause of disappointment is not the sensor but the coverage. Measure connectivity along round routes, in basements, in halls with thick walls and in remote yards. Where the network is blocked or limited, you need a coverage solution or a decision that work in that place is not done alone. For plants with blocked outbound traffic, alarm webhooks are stored in a persistent queue collected over a working inbound channel, so delivery depends on the polling frequency.
Recommendation 7: rehearse alarms and document the tests
A risk assessment stays alive only when the chain is tested. Run test alarms on every shift in the first month, then quarterly, and record the result. The InnerWeb audit trail records who changed a permit, training results or an automation rule and when, and the alarm and notification log provides evidence for the audit. This supports meeting the requirement to document preventive measures, but it does not relieve the employer of responsibility under Article 207 of the Polish Labour Code.
Time budget until help arrives
| Parameter | Value |
|---|---|
| No-movement threshold | 5 min |
| Time to confirm | 1 min |
| Dispatcher notification and decision | 2 min |
| Arrival with known location | 8 min |
| Arrival without location | 20 min |
Result: 16 min with location, 28 min without location; a difference of 12 min.
Note: Sample calculation: values are matched to the workplace in the risk assessment; they are not fixed product parameters.
Video
Frequently asked questions
Where should a lone worker risk assessment start?
With an inventory of workplaces and routes where an employee may be alone, and a list of tasks excluded from lone working.
Can one threshold be set for the whole plant?
Better not. Thresholds are configured in the panel, so they can be differentiated by workplace, time of day and location.
Is no-movement detection enough without location?
It detects the event but does not say where to search. On large sites, location shortens the arrival of help, as the sample calculation shows.
Sources
Let us talk about protecting lone workers
We will show on your plant plan how no-movement detection, SOS and location close the gap in lone working. Book a conversation with the InnerWeb team.
Let's talk