Why an OT cabinet is a separate problem
A control cabinet on an assembly line holds controllers, power supplies, fuses and often the machine's communication equipment. Opening it without preparation risks an electric shock, and a mistake during reprogramming can stop the line. Unlike the server room, cabinets stand in a space where hundreds of people pass through during every shift.
Usually access is governed by a key hanging in the maintenance office or by a shared lock whose key is held by half the plant. Who opened the cabinet at night is known only to the person who was there. The cabinet has no log of its own, so there is no evidence of entry into the technical area.
The scenario assumes that we do not replace locks or add equipment to every cabinet. We change the way work at the cabinet is prepared: who may take it on, within which window and with which protective measures.
A work permit for a cabinet: task, location, window
An electronic work permit defines the task, the location and the time window, and it moves through the preparation, main works and closing phases. For an OT cabinet the task might read 'replacing the input module in the line 3 cabinet', the location is a specific area on the shop floor map, and the window is the downtime planned by the production scheduler.
Work outside the window has no basis. When the window ends and the cabinet is still open, an automation rule can send a notification by email or push to the coordinator. The rule is built in a no-code creator and reacts to a change in the permit status, to a schedule or to an alarm.
If the automation technician comes from an external firm, the flow of assigned permits lets the client side and the contractor work on the same document. Maintenance can see who is at the cabinet and on what basis.
Phases of the work permit for an OT cabinet
Qualifications and risks assigned to the location
The entry verdict is based on valid training and qualifications for hazardous work. An automation technician without current electrical authorisation does not get a green verdict, and the screen shows the list of missing items, not just a refusal. This shortens the conversation at the gate and on the floor.
The catalogue of risks and protective measures can be assigned to a location (hall, area, line, spot), to a type of hazardous work and to a permit. The set for a cabinet on the painting line will differ from the set for a cabinet in the assembly hall, even though both are OT cabinets. The risk is therefore part of the place, not of a generic form.
Location inside the building is based on one transmitter per 100-200 m2 and works without GPS. The position is computed from signals of several transmitters averaged on the map, which makes it possible to check whether the person with the permit is actually in the area the work concerns.
Roles and permissions: who issues a permit for a cabinet
Permissions in InnerWeb come from roles with inheritance and a matrix of scopes. Roles are granted along a seniority ladder, and a role higher than one's own cannot be granted. In practice, the maintenance manager cannot grant a coordinator more permissions than the manager holds.
For OT cabinets it is worth separating two roles: the person who prepares the permit and the person who approves it. For controllers on a critical line the shift manager approves, for the others the coordinator. The split is recorded in the scope matrix, and permission changes go to the audit trail with their author and time.
The effect and conclusions
In this scenario every opening of a cabinet has a task, a person, a window and risks recorded in the system, so the evidence for the security audit and for the occupational health and safety team is the same. The plant gains a log it did not have, without buying electronic locks for every cabinet.
If a cabinet already has access control with a reader, card badge events can be passed from the client's KD system through a webhook and linked to the permit. Where there is no reader, a scan of the badge by the person holding the permit is enough. Start with 3-5 cabinets on the line most sensitive to downtime.
Video
Frequently asked questions
Does every OT cabinet need a reader?
No. Where there is no reader, opening is tied to a permit and a badge scan. Where a reader works, badge events can be passed from the client's KD system through a webhook.
Who approves the work permit for a controller?
It depends on the scope matrix at the plant. For a critical line the shift manager usually approves, for the others the maintenance coordinator.
What if an automation technician from an external firm has no qualifications?
The verdict will not be green and the screen will point to the missing items. The permit can be opened only after the qualifications are completed.
Sources
Let's talk about evidence of server room entries
We will show in a demo how badge events from your access control system connect with the permit and the log. No reader replacement and no card changes.
Let's talk