InnerWeb
Skip to main content

Missing clock-out in RCP: three-shift plant scenario

A missing clock-out is the most common gap in working time records at a plant where shifts change at the gate within a few minutes. This scenario shows what the system does on its own, what the shift supervisor must do, and how the employee closes the case before the gap reaches HR.

34 min
default threshold for the reminder call
Source: working time module documentation
89 min
default threshold for an uncertain exit
Source: working time module documentation
12 h
default maximum presence time for an external company
Source: working time module documentation

Starting point: a three-shift plant and gates at peak hours

The scenario describes a production plant running three shifts, where entries and exits are recorded by scanning a QR code at the gate. The same scan feeds the evacuation list, so each entry and exit record matters both for working time records and for safety.

At shift changeover a queue forms at the gate. An employee finishing the day hurries to the bus, a colleague from the next shift calls from the other side, and the phone goes into a pocket. The outcome is predictable: the entry is there, the exit is not. The working time module creates an open record that keeps growing for more than a dozen hours if nobody reacts.

The InnerWeb working time module treats such a record as an exception, not as an error someone discovers when closing the month. The gate scan creates the time record, and any deviation from it goes to the supervisor's exception queue.

Timeline: what the system does after 13, 34 and 89 minutes

The module runs on time thresholds that are administrator settings, not values hard-coded into the product. By default, the exit classification tolerance is 13 minutes, the reminder call starts after 34 minutes, and the exit is marked as uncertain after 89 minutes.

This way short deviations from the rota do not generate alarms, while a genuinely missing exit receives further signals at controlled intervals.

  • 13 minutes: classification tolerance for an exit, a margin for the queue at the gate and the walk to the scanner.
  • 34 minutes: the system places a reminder call to the person who has not scanned an exit; the call is made by the telephone dispatcher.
  • 89 minutes: the exit is marked as uncertain and goes to the supervisor's exception queue.
  • The reminder call rings at most once a day on one channel, so the person does not receive a series of calls.

Default reaction thresholds for a missing clock-out

Default reaction thresholds for a missing clock-outHorizontal bar chart: exit tolerance 13 minutes, reminder call 34 minutes, uncertain exit 89 minutes.020406080100minExit toleranceExit tolerance: 13 min13Reminder callReminder call: 34 min34Uncertain exitUncertain exit: 89 min89
Source: Working time module documentation, default settings

Role of the shift supervisor: the missing clock-out queue

The shift supervisor sees in the team console an exception queue in which one of the types is a missing clock-out. Next to it are changed exit, declared time, late arrival, work outside the rota, exceeded norm and broken rest. The missing clock-out is reviewed first, because it affects all the other figures in the period.

The supervisor sees only their own sub-tree, meaning the employees assigned to their structure. They cannot see other teams and cannot correct their own record: on their own record, the supervisor role gives view-only access. This has a clear control purpose: the person approving hours does not approve their own.

Order of work at the start of a shift

The supervisor opens the queue at the start of the shift, while the previous shift is still fresh in mind. For each missing clock-out, they check whether the employee answered the reminder call and whether they confirmed the time themselves. If not, they contact the employee or the team leader and establish the facts before entering any correction.

Role of the employee: confirming the time instead of a silent correction

For an internal employee, the system does not guess the exit time. After the hour limit is exceeded, the automatic closure does not record a real exit: the day is marked as a missing clock-out, and the employee confirms the time themselves. This distinguishes records based on evidence from records filled in by guesswork.

The employee can also register an entry, exit or break from their phone. The declared time must fall within the range from 13 days back to 180 seconds forward, and a declared entry counts as approved only after the supervisor confirms it. The declaration therefore does not replace control, it triggers it.

External company: a different rule, the same goal

An employee of an external company, for example a service or refurbishment crew, falls under a different rule. After the maximum presence time is exceeded, the system checks them out automatically and records the exit. The default limit is 12 hours.

The difference follows from the purpose of the records. For an internal employee the precise working time matters, so their confirmation is needed. For an external person the most important thing is an accurate list of people on site, so the automatic check-out closes the presence record rather than settling working hours.

Conclusions for a three-shift plant

The biggest gain comes from setting the thresholds to the rhythm of the shifts: the tolerance must cover the queue at the gate, and the reminder call should not ring people who are still walking to the changing rooms. Supervisors should have a fixed review point for the queue, and employees should know one rule: an unconfirmed time does not enter the export for HR.

Keeping working time records is the employer's obligation and the basis for establishing pay (Labour Code (Kodeks pracy), art. 149 section 1), so gaps in exit records have a real payroll effect. The module does not calculate pay, but it provides an ordered record that HR can use.

Video

Frequently asked questions

Does the reminder call ring more than once?

No. The system calls once a day on one channel to the person who has not scanned an exit. Further steps belong to the supervisor, who sees the exception in the queue.

Does the system enter the exit time for the employee?

Not for an internal employee. The day is marked as a missing clock-out and the employee confirms the time themselves. For an external company, the exit is recorded by the automatic check-out after the limit.

Can a shift supervisor correct their own missing clock-out?

No. On their own record the supervisor role gives view-only access; the correction is approved by another person in the structure or by HR.

Can the thresholds be changed?

Yes. The tolerance, the uncertainty threshold and the reminder call time are settings, so the plant adjusts them to its shift rhythm.

Sources

See the exception queue on an example of your shift

We will show how the thresholds and the reminder call work in a plant with your shift rhythm. Book a short call with the InnerWeb team.

Let's talk